How To Turn Off Gas Fireplace Pilot Light

How To Turn Off Gas Fireplace Pilot Light. Ignite the gas when the valve is opened; When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner.

Gas Fireplace Pilot Lights But Wont Turn On Lighting Ideas from decorlighting.port-media.org

How to turn off pilot light on a gas fireplace. We recommend that you turn off your gas fireplace pilot light seasonally. A therm = 100,000 btu.

Gas Fireplace With The Pilot Always On, Has A Hole With Key In It On The Floor Right Next To Fireplace (Based On Prior Answers Thats For Gas Supply), A ‘Light’ Switch Across The Room That When Flipped On Basically Turns The Flames On And Entire Fireplace Lights Up, Then A Knob Next To The Light Switch That When Turned Clockwise Increase The Size Of Flame, And Vice Versa.

With your hand still pressing the control. Set (my set doens t have a wall switch), the manual valve on the log. Turn the dial so the arrow or mark on top points to.

Push In The Pilot Knob, Which Manually Sends Gas Into The System.

Alternatively, you need to press the knob and confirm its “off” position. Almost all gas fireplaces operate through the ignition of gas using a control system called an ignitor. The easy turnings off steps are the following:

Unscrew The Switch Cover Plate (Flat Screw Set 1) And The Switch Itself (Flat Screw Set 2) With A Flat Screwdriver.

If you want to stop the gas flow, turn the gas valve a quarter turn, perpendicular to the incoming gas line. Most modern gas fireplaces will have an ignitor, and if you do, use it. Simply push the “on” button and the pilot should ignite.

The Thermocouple And The Thermopile (What You Will Have Depends On Your Model) Are Have The Specific.

Once the dial is turned off, the gas supply will shut off for the furnace leading to pilot lights turning off. There will be a switch that you can turn from on to off to turn off the stove’s pilot light. Turn the gas valve to off.

So, If Your Pilot Uses 1,000 Btu/Hr And It Is Running For 24 Hours A Day, And 30 Days A Month, That Comes Out To Be About 720,000 Btu.

Many homeowners worry that there will be a gas leak present if the pilot goes out. For standing pilot gas fireplaces, the pilot light can be turned off whenever necessary by following the steps in the reverse order to lighting the pilot flame. The gas supply to the pilot light will be cut off and the flame will go out.

Leave a Comment